My company's photo machine nozzle products to ensure the original quality, stable and reliable performance, durable life. Main brands: Muto, Roland, Mimaki, Konica, Sal, Toshiba, Kyocera, Seiko, Polaris, Ricoh, EPSON and other original sprinkler heads; Product series: the original four/six color color photo machine nozzle, piezoelectric photo machine nozzle, shower nozzle spray painting machine, UV machine nozzle, titanium long nozzle, the nozzle wall painting machine, banner machine nozzle, digital printing machine nozzle, epson/Roland, Mimaki/muto piezoelectric nozzle, indoor water nozzle, outdoor oil nozzle, high fluid pictorial machine ink. Suitable for hot foaming photo machine/piezoelectric photo machine/inkjet printer and other advertising equipment. The company has passed iso9001:2000 quality management system certification, and its products are sold to southeast Asia, Middle East, South Africa, Europe, America and other countries and regions.
Installation method of nozzle of piezoelectric photo machine:
1, the installation of piezoelectric photo machine nozzle is very critical, the main reason is that the nozzle is expensive, the nozzle is more delicate, installation error will directly affect the normal printing state of the nozzle. So it is necessary for us to say the EPSON piezoelectric photo machine nozzle installation method [piezoelectric photo factory house, more and more dealers, pictorial machine users into our piezoelectric nozzle for a long time, in order to facilitate users to install shower nozzle, the company has to burn into CD piezoelectric nozzle installation steps, free for customers in need] just according to the simple and convenient installation cd-rom demo nozzle, 10 minutes can be installed.
2. Before installing the piezoelectric sprinkler head, first make sure that the machine is in normal motion, the ground wire of the machine is connected perfectly, the voltage on the small car plate is normal, and the voltage supplied by the sprinkler head is normal! The simplest way is to use a multimeter to measure whether there is static electricity on the machine, the voltage of the small car plate, and the power supply voltage of the sprinkler head. The power supply voltage of the general Epson five-generation sprinkler head is 42V DC!
3, with the software test machine all aspects of the movement is normal, raster reading is normal, indicator light is normal! Before installation, the installer should touch the conductive body to discharge both hands. There should be no sweat or water vapor on the hands of the operator, because once you touch the plug of the nozzle line, it may cause short circuit of the nozzle! In addition, remember not to wear plastic cloth clothes prone to static electricity, both hands with static ring in the case of conditions allow. When installing, be sure to turn off the power first and unplug the power cord!
4. Generally, there are no less than two data insertion lines on the sprinkler head. Check whether there are any upturned stitches and whether it is flat. The calibration of the nozzle line is generally divided into two sides, one side contacts the circuit, the other side does not contact the circuit, the direction is not wrong, after the insertion must be checked several times, to make sure that there is no problem before installing the nozzle on the trolley frame.
5. The sprinkler line is connected to the car board: First, the machine should be operated without electricity when the power is turned off! Do not error position, the corresponding position of the line out of the nozzle must be clear and then start, there is hesitation or uncertainty must not be installed first try, must consult the manufacturer or ask for the correct insertion line position picture, or take a photo before the removal and replacement of each line to make a mark! If you don't know where to start! Because the consequences will be very serious, once the possibility of error burning is very high, because the function of the sprinkler line is not the same, the wrong insertion is bound to burn! There is the direction of the insertion of the thread can not be reversed, once inserted, although it may not burn the head, but there is a probability. Always check the cable after you plug it in.
6. Check for three to five times after all installation, and turn on the power after confirming that there is no problem. Do not turn on the sprinkler head first, use the ink pump to draw the ink, and then turn on the sprinkler head. If the flash spray is abnormal, please turn off the power immediately to check if there is any problem in other places. This is under the condition of confirming the new sprinkler head.
7, the installation of nozzle must be careful, the installation of the work is not less, and must be clear.
8. It is also critical to check whether the sprinkler head is brand new before installation.
9. Never let the ink drop onto the data line when inserting the ink bag, because the ink will directly enter the circuit after flowing down the data line, which may cause a short circuit and direct burning.
10. The normal service life of the original piezoelectric photo printer nozzle is more than 2 years. Choose high quality ink, and pay more attention to the maintenance of the machine and nozzle, can prolong the life of nozzle.
Consultation service 180-22433256
Enterprise email epsonprinthead@foxmail.com
